** Next:** .save Line
** Up:** WRspice Input Format
** Previous:** .tran Line
** Contents**
** Index**

In these lines, outputs can be specified using the SPICE2 notation. The
form is `v`*xx*(*node1*[,*node2*]), or
`i`*xx*(*branch_device*). The *xx* can be left out,
indicating the basic voltage or current, or be one of the following.

`m ` |
Magnitude |

`p ` |
Phase |

`r ` |
Real part |

`i ` |
Imaginary part |

`db ` |
Decibel value (
20*log*_{10}
) |

These forms are not usually needed for other than ac analysis.
The `(`*node1*, *node2*) notation indicates a voltage
difference between nodes *node1* and *node2*. If *node2*
and the associated comma are left out, the ground node is assumed.
Output variables for noise, distortion, and some other analyses have
a different general form. See the description of the analysis
for the output variable names.

**Subsections**

Stephen R. Whiteley
2019-06-03